安装隔热防腐彩涂卷时，工人应注意什么？
隔热防腐彩涂卷的安装属于高空作业，高空作业必须有防护措施。今天，我就给大家介绍一下隔热防腐瓷砖的相关内容。让我们看看！
1高处作业时，保温、防腐瓦作业人员必须按规定选择、佩戴和使用防护带。并可靠地固定在坚实的地方，不戴防护带移动和易碎的地方。
2
隔热防腐彩涂卷属于攀爬作业。严禁抛掷、转移保温、防腐瓦。用绳索或吊索将保温防腐瓦转移。
三。
隔热防腐彩涂卷工作人员有高血压、低血压、头晕、癫痫、心脏病等禁忌症时，不得安装保温、防腐瓦。
4由于上面建造的隔热砖可能会掉落物体，或在起重机手柄摆动范围内的通道内，因此顶部必须在受影响范围内建造，以防止穿透透明双层保护走廊。
5悬挂、安装保温瓦构件、吊装大中型钢构件时，必须站在操作平台上操作。
6工程施工组织设计必须包括防护技术措施、所需材料和工具、
隔热防腐彩涂卷的安装。
7保温彩瓦施工前，应逐级进行技术教育和交底，落实各项技术措施和个人防护用品。未经落实不得施工。
8安装
隔热防腐彩涂卷的技术人员、登高作业人员和高处设施设置人员，必须经过隔热防腐瓦技术培训并考试合格，能够上岗并进行身体检查。
9保温防腐瓦施工中高空作业的防护技术措施，发现的缺陷和隐患必须及时解决。如有人身危险，必须停止保温防腐瓦作业。
10雨天安装隔热防腐瓦必须采取可靠的防滑措施。
11防护棚搭设和拆除时，应设置警戒区，并设专人监护。严禁同时设置和拆除。
What should workers pay attention to when installing heat insulation and anticorrosive tile?
The installation of heat insulation and anti-corrosion tile belongs to high-altitude operation, and there must be protective measures for high-altitude operation. Today, I will tell you about the relevant content of heat insulation and anti-corrosion
tile. Let's have a look!
1. When working at height, operators of heat insulation and anti-corrosion tile must select, wear and use protective belt according to regulations. And reliably fixed in a solid place, do not wear a protective belt to move
and fragile places.
2. The thermal insulation and anti-corrosion tile belongs to climbing operation. It is forbidden to throw and transfer the thermal insulation and anti-corrosion tile. Use ropes or slings to transfer the thermal insulation and
anti-corrosion tile.
3. It is not allowed to install thermal insulation and anti-corrosion tiles if the staff of thermal insulation and anti-corrosion tiles suffer from hypertension, hypotension, dizziness, epilepsy, heart disease and other contraindications.
4. Due to the fact that the insulating bricks constructed above may fall objects, or in the passage within the swing range of the crane handle, the top must be constructed within the affected range to prevent penetration of a transparent double-layer
protective corridor.
5. When suspending and installing insulating tile components and lifting single large and medium steel member, it is necessary to stand on the operation platform for operation.
6. The protective technical measures, required
materials and tools, and the installation of thermal insulation tile must be included in the construction organization design of the project.
7. Before the construction of thermal insulation colored tile, technical education and disclosure shall
be conducted step by step, and various technical measures and personal protective equipment shall be implemented. No construction is allowed without implementation.
8. The technical personnel who install the heat insulation and anti-corrosion tile,
the climbing operators and the personnel who set up the facilities at high places must pass the technical training of the heat insulation and anti-corrosion tile and pass the examination, be able to work and have a physical examination.
9. The protective
technical measures for high-altitude operation in the construction of heat insulation and anti-corrosion tile, and the defects and hidden dangers found must be solved in time. In case of personal danger, the operation of thermal insulation anti-corrosion
tile must be stopped.
10. Reliable anti-skid measures must be taken to install heat insulation anti-corrosion tile in rainy days.
11. When the protective shed is set up and removed, a warning area shall be set up and supervised by a specially
assigned person. It is strictly forbidden to set and dismantle them at the same time.
