彩钢板纵剪线运用前检查

彩钢板纵剪线是冷轧钢板、热轧钢板、不锈钢板、镀锌钢板等各种规格的定长钢板开卷调平后的生产线。适用于不锈钢制品、电器、车辆、机械制造等行业。开卷调平线的良好使用取决于其质量。彩钢板纵剪线的质量首先由材料决定，它的原材料决定它的强度不能由加工工艺决定。它是材料本身的功能，只与材料加工中的因素有关。

由于辊子张力的存在，彩钢板纵剪线可以减少板材表面的摩擦，获得张力，因此不受速度的限制，这是今后分切机发展的主要方向。可用于多卷筒的辊式张力站技术是克服这一问题的一项好技术。分切线可以减少板面摩擦，获得张力，不受速度的限制。现在很多辊道张力站都是比较新的技术， 彩钢板纵剪线需要在辊道张力站下进行大量的工作才能达到标准水平。结合目前的情况，线圈表面无损伤高速纵切生产线将是今后的主要发展方向。本系列分切线用于生产钢材。金属卷板开卷、纵向切割并卷绕至所需宽度。如果你想要高速，紧张是非常重要的。
在使用分切线之前应该做什么检查
1检查电气装置、压缩空气是否正常，夹送辊、调平辊上是否有杂物。
2检查压缩空气过滤器是否需要放水，油杯是否缺油。
三。检查开卷线机械部分是否松动或损坏，并进行调整。
4检查开卷线刀的间隙是否与开卷平板的厚度相适应。
5检查液压系统油位是否正常。
6检查开卷线的平滑度，看主动注油器的油位是否正常。

The slittin line is a kind of fixed length plate with various specifications after uncoiling and leveling, such as cold rolled steel plate, hot rolled steel plate, stainless steel plate and galvanized steel plate. It is suitable for stainless steel products, electrical appliances, vehicles, machinery manufacturing and other industries. The good use of uncoiling and leveling line depends on its quality. Its quality is determined by the material first, and its raw material determines its strength It can't be determined by the processing technology. It's the function of the material itself, which is only related to the factors in the material processing.

Because of the roller tension, the slitting line can reduce the friction on the surface of the plate and get the tension, so it is not constrained by the speed, which is the main direction of the development of slitting Slitter in the future. The roller tension station skill that can be used for multiple reels is a good skill to overcome this aspect. The slitting line can reduce the friction of the plate surface and get the tension, so it is not constrained by the speed. Now many rolling tension stations are relatively new skills, and it needs a lot of work under the roller tension station to reach the standard level. Combined with the current situation, the coil surface damage free and high-speed slitting production line will be the primary development direction in the future. This series of slitting lines are used for the production of steel The metal coil plate is decoiled, cut lengthwise and wound to the required width. If you want high speed, tension is very important.
What inspection should be done before using the slitting line
1. Check whether the electrical device and compressed air are normal and whether there are sundries on pinch roll and leveling roll.
2. Check whether the compressed air filter needs to drain water and whether the oil cup is short of oil.
3. Check whether the mechanical part of the uncoiling line is loose or damaged, and adjust it.
4. Check whether the gap of the uncoiling line cutter is suitable for the thickness of the flat plate to be uncoiled.
5. Check whether the oil level of the hydraulic system is normal.
6. Check the smoothness of the uncoiling line to see if the oil level of the active oiler is normal.