热浸镀铝锌彩钢板

根据要求，也可采用热浸镀铝锌钢板作为彩涂基材（55%al-zn和5%al-zn）。

彩涂板

电镀锌彩钢板

底板采用镀锌板，有机涂层烘烤的产品为镀锌彩钢板。由于镀锌板锌层较薄，锌含量一般为20/20g/m2，因此该产品不适用于室外墙面、屋顶等，但由于其外观美观、加工性能优异，可主要用于家用电器、音响、钢制家具、室内装饰等。

彩涂冷轧钢板

由冷轧基板生产的彩钢板外观光滑美观，具有冷轧板的加工性能；但表面涂层上的任何细小划痕都会使冷轧基板暴露在空气中，使外露的铁迅速产生红锈。因此，此类产品只能用于临时隔离措施和要求较低的室内材料。

热镀锌彩钢板

在热镀锌钢板上涂覆有机涂层得到的产品是热镀锌彩涂板。热镀锌彩涂板表面的有机涂层除了起到保护锌的作用外，还起到绝缘保护和防锈的作用。其使用寿命比热镀锌板长。热镀锌基板的锌含量一般为180g/m2（两侧），建筑用热镀锌基板的最大锌含量为255g/m2。

According to the requirements, hot-dip aluminum zinc steel plate can also be used as the color coating substrate (55% AI Zn and 5% AI Zn).

Color coated sheet

Electro galvanized color coated plate

The galvanized sheet is used as the base plate, and the product baked with organic coating is galvanized color coated sheet. Due to the thin zinc layer of the galvanized sheet, the zinc content is usually 20 / 20g / m2, so the product is not suitable for outdoor wall, roof, etc. But because of its beautiful appearance and excellent processing performance, it can be mainly used in home appliances, acoustics, steel furniture, interior decoration, etc.

Cold rolled steel plate with color coating

The color plate produced by the cold-rolled substrate has a smooth and beautiful appearance, and has the processing performance of the cold-rolled plate; however, any small scratch on the surface coating will expose the cold-rolled substrate to the air, so that the exposed iron will quickly generate red rust. Therefore, such products can only be used for temporary isolation measures and indoor materials with low requirements.

Hot dip galvanized color coated steel plate

The product obtained by coating the organic coating on the hot-dip galvanized steel plate is the hot-dip galvanized color coating plate. In addition to the protection of zinc, the organic coating on the surface of the hot-dip galvanized color coated plate also plays the role of insulation protection and rust prevention. Its service life is longer than that of the hot-dip galvanized plate. The zinc content of hot-dip galvanized base plate is generally 180g / m2 (both sides), and the maximum zinc content of hot-dip galvanized base plate for external use of buildings is 275g / m2.