彩涂板生产工艺流程及实际操作控制系统

天物彩板专注彩板行业16年——更多保山彩涂板厂家电话_山东彩涂卷排行请拨打网站上方电话咨询

彩涂板是住宅建筑行业的热门产品。我认为它的评价是如此之高，以至于它进行了一步一步的奋斗和艰苦的工作。我认为它有许多显著的特点。强度高，可作为顶棚围板炉的结构板进行承重、抗压、抗弯，颜色多样，可满足用户的不同要求。

彩涂板的产品质量不仅取决于彩涂板和建筑涂料的基本特性，还取决于生产工艺和实际操作控制系统。实际的操作控制系统对彩涂产品的工艺性能和工艺性能有很大的危害。从生产过程分析，生产控制系统的首要任务应包括清洗液、化学镀液、喷涂和干固四个阶段。
聚偏氟乙烯（PVDF）产品的聚氨酯涂层较厚。由于申请期较长，需提交担保书。反向涂层的规定取决于主要用途。彩涂板只有一层胶面。由于房间的自然环境，形成的厚钢板也需要双层涂层。最小厚度约为12μM。
装饰工程可以节省时间和人力，缩短装饰工程的施工周期，防震、防火、防雨、长寿。这些优势可以得到肯定，使其在城市中具有稳定的影响力，也让广大人民享受到它带来的幸福。
另一方面，在目前的中国销售市场上，有两种错误的选择：
不可否认，近年来，彩钢板生产企业在发展传统实体经济中遇到了很多问题，特别是近年来，房地产市场持续低迷，作为下游彩钢板建材行业，彩钢板行业更是难上加难。此外，自去年环境监管以来，原材料市场和成品市场价格不断上涨，消费者抵制价格上涨，这一切都在火上浇油。
涂层的质量决定了涂层的质量，并立即决定涂层的柔韧性、能量、抗冲击性和其他物理指标。测量了涂层在彩涂线圈和彩涂板上的附着力。初涂、精涂、干固的目的是在面板上施涂建筑涂料，并选择加热方式将建筑涂料的溶剂蒸发，使有机化学涂料与面板紧密相连。
3、 涂层厚度的选择
根据彩涂板所在的环境，如环境多尘、易受潮，应在短时间内清洗干净。如果环境相对封闭，使用效率不高，清洗时间可适当放宽。当然，具体的清洗注意事项要详细分析。以上只是彩色涂层线圈制造商提供的一般和常见预防措施。如果您有任何问题，请随时与我们联系。

Color coated board is a popular product in the residential construction industry. I think its evaluation is so high that it has carried out step-by-step struggle and hard work. I think it has many remarkable features. It has high strength, can be used as the structural plate of ceiling coaming furnace for bearing, compression and bending resistance, with various colors, and can meet different requirements of users.

The product quality of color coated board not only depends on the basic characteristics of color coated board and architectural coating, but also depends on the production process and actual operation control system. The actual operation control system is very harmful to the technological performance and technological performance of color coated products. From the analysis of the production process, the top priority of the manufacturing control system should include four stages: cleaning solution, chemical plating solution, spraying and dry solid.
The polyurethane coating for PVDF products is thick. Due to the long application period, the guarantee shall be submitted. The provisions for reverse coating depend on the main purpose. The color coated board has only one layer of adhesive finish. Due to the natural environment of the room, the formed thick steel plate also needs double-layer coating. The minimum thickness is about 12 μ M.
The decoration project can save time and labor, shorten the construction period of the decoration project, prevent earthquake, fire, rain and long life. These advantages can be affirmed, make it have a stable influence in the city, and also let a large number of people enjoy the happiness it brings.
On the other hand, in the current Chinese sales market, there are two wrong choices:
It is undeniable that in recent years, the color steel plate production enterprises in the development of traditional real economy have encountered many problems, especially in recent years, the real estate market continues to be depressed, as the downstream color coated plate building materials industry, color steel plate industry is even more difficult. In addition, since last year's environmental supervision, the raw material market and the finished product market have been rising in price, and consumers have resisted the price rise, all of which add fuel to the fire.
The quality of the coating determines the quality of the coating, and immediately determines the flexibility, energy, impact resistance and other physical indicators of the coating. The adhesion of the coating on the color coated coil and the color coated plate was measured. The purpose of initial coating, fine coating and dry consolidation is to apply architectural coating on the panel, and select heating method to evaporate the solvent of architectural coating, so that organic chemical coating is closely connected with the panel.
3、 Selection of coating thickness
According to the environment where the color coated plate is located, if the environment is dusty and susceptible to moisture, it shall be cleaned in a short time. If the environment is relatively closed and the use efficiency is not high, the cleaning time can be appropriately relaxed. Of course, the specific cleaning precautions should be analyzed in detail. The above are just general and common precautions provided by the manufacturer of color coated coils. If you have any questions, please feel free to contact us.