彩涂铝卷（铝镁锰彩涂）生产工艺简介

天物彩板专注彩板行业16年——青岛彩涂铝卷多少钱一吨_铝镁锰彩涂价格表请拨打网站上方电话咨询

彩涂铝卷是指在铝卷表面具有彩色喷涂效果的产品，又称彩涂铝卷和彩涂铝卷。涂层处理的目的是在建筑、装饰、家居等领域产生美观的效果；二是涂层工艺和涂层厚度直接关系到涂层铝卷的产品质量和使用寿命。
彩涂铝卷（铝镁锰彩涂）生产工艺简介
彩涂工艺是彩涂铝卷生产的关键环节，直接影响到彩涂的最终质量和产品的耐久性。因此，涂层工艺非常严格。随着镀膜设备的不断改进和新型涂料的开发利用，镀膜铝卷的生产更加成熟，加工成本也在降低。因此，镀铝线圈得到了迅速的发展。那么涂铝卷的具体工艺是什么？
一般来说，钢卷涂装的生产过程有五个步骤，即钢卷投入、清洗和化学处理、涂装、固化和成品输出。不同情况下工艺布置和设备组成不同，但基本部件相同。
彩涂铝卷（铝镁锰彩涂）生产工艺简介
1、 原料辊的输入是开卷机的连续开卷，保证卷料连续稳定地输入生产线。有的采用十字旋梁式卷取机，有的采用前后两台交替开卷机，简而言之，是为了及时供应卷取机
2、 表面清洗和化学处理是将铝卷上下表面清洗干净，并进行化学预处理，以确保油漆能牢固附着；
3、 一条生产线至少有两台辊涂机，以保证两道面漆和底漆；
4、 指漆层的固化，即刚涂完漆的线圈在接触下一个辊面前应固定好，以免相互粘连和损坏。一般来说，至少包括两个固化箱；
5、 它是成品的输出，保证生产线的速度和成品的转移是同步的。

Coated aluminum coil refers to a product with color spraying effect on the surface of aluminum coil, also known as color coated aluminum coil and color aluminum coil. The purpose of coating treatment is to have beautiful effect in construction, decoration, home and other fields; the second is because the coating process and coating thickness are directly related to the product quality and service life of coated aluminum coil.

Brief introduction of production process of color coated aluminum coil (aluminum magnesium manganese color coating)
Coating process is a key step in the production of color aluminum coil, which directly affects the final coating quality and product durability. Therefore, the coating process is very strict. With the continuous improvement of coating equipment and the development and utilization of new coatings, the production of coated aluminum coil is more mature and the processing cost is also decreasing. Therefore, coated aluminum coil has developed rapidly. So what is the specific process of coating aluminum coil?
Generally, the production process of coil coating has five steps, i.e. coil input, cleaning and chemical treatment, painting, curing and finished product output. The process layout and equipment composition are different in different situations, but the basic parts are the same.
Brief introduction of production process of color coated aluminum coil (aluminum magnesium manganese color coating)
1、 The input of raw material roll is the continuous uncoiling of Uncoiler to ensure the continuous and stable input of the coil into the production line. Some adopt the cross rotating beam type coiler, and some adopt two sets of alternating uncoiler in front and back, in short, it is for the timely supply of coil
2、 Surface cleaning and chemical treatment are to make the upper and lower surfaces of the aluminum coil clean and carry out chemical pretreatment to ensure that the paint can adhere firmly;
3、 A production line has at least two roller coaters to ensure two coats of finish and primer;
4、 It refers to the curing of the paint layer, which means that the coil just being painted shall be fixed before contacting the next roll surface to avoid adhesion and damage to each other. Generally speaking, it includes at least two curing boxes;
5、 It is the output of finished products to ensure that the speed of the production line and the transfer of finished products are synchronous.