浅谈铝板粉末喷涂的显著优势

唐山天物新产品，粉末喷涂彩板——耐酸耐碱，金甲护卫，是传统溶剂型彩涂板的5-6倍，采用高速静电喷涂工艺，15-30秒快速固化

在喷粉功能之前，铝板厂家也向大家表示，所谓的喷粉就是采用粉末喷涂，采用经典喷涂，起到摩擦喷枪的作用。在加速风的作用下，粉末颗粒喷射出枪体时携带正电荷，与负电荷剖面接触，产生静电吸附，然后在高温下固化。提高了铝管排三叶上涂层的吸附强度，防止漆膜脱落。铝板制造商的具体优势如下：

1。 粉末喷涂彩板成品率高。一般来说，如果措施得当，不合格产品的生产可以在很大程度上得到控制；

2。 粉末喷涂彩板原料表面质量标准明显降低。粉末涂层可以完全覆盖型材表面的挤出线，掩盖部分铝型材表面的缺陷，提高成品铝型材的表面质量。7号。与其它表面处理膜相比，该涂层膜的硬度、耐磨性等物理指标明显提高，能有效延长铝型材的使用寿命。;

3。 粉末喷涂彩板能耗明显降低。在普通阳极氧化和电泳涂料的生产过程中，水和电的消耗量很大，特别是在氧化过程中。

4。 粉末喷涂工艺相对简单，主要是由于生产过程中主要设备自动化精度的提高。对于一些主要的技术参数，实现了微机控制，有效地减少了工艺操作的难度，同时大大减少了辅助设备；

5。工人劳动强度明显降低。由于采用自动流水线操作，大大简化了送料方式和铝棒的使用及夹具的型材规格型号，提高了生产效率，降低了劳动强度；

6。降低了水和空气的污染程度，不再使用片碱、硫酸等液体有机溶剂，减少了水和空气的污染，有效提高了铝型材和塑钢型材作为环保产品的竞争力，相应降低了部分生产成本。

Before the function of powder spraying, the aluminum plate manufacturer also said to everyone that the so-called powder spraying is to use powder coating, using classic spraying, which plays the role of friction spray gun. Under the influence of accelerating wind, the powder particles carry positive charge when they spray out the gun body, contact with the negatively charged profile, generate electrostatic adsorption, and then solidify at high temperature. It also enhances the adsorption strength of the coating on the three leaves of the aluminum tube row to prevent the paint film from falling off. The specific advantages of aluminum plate manufacturers are as follows:

1. The rate of finished products is high. In general, if the measures are appropriate, the production of unqualified products can be controlled to a large extent;

2. The surface quality standard of the raw material is obviously reduced. The powder coating can completely cover the extrusion lines on the surface of the profile, cover up the defects on the surface of some aluminum profiles, and improve the surface quality of the finished aluminum profile. 7. Some physical indexes of the coating film are obviously improved compared with other surface treatment films, such as hardness and wear resistance, which can effectively extend the service life of the aluminum profile. ;

Third, the energy consumption is significantly reduced. In the production process of ordinary anodizing and electrophoretic coating, the consumption of water and electricity is quite large, especially in the oxidation process.

4. The process is relatively simple, mainly due to the improvement of the automatic accuracy of the main equipment in the production process. For some main technical parameters, microcomputer control has been realized, effectively reducing the difficulty of process operation, while the auxiliary equipment is greatly reduced;

5. The labor intensity of workers is obviously reduced. Because of the use of automatic assembly line operation, the feeding mode and the use of aluminum bar and profile specification mode of clamps have been significantly simplified, which improves the production efficiency and reduces the labor intensity;

Vi. the pollution degree of water and air is reduced, flake alkali, sulfuric acid and other liquid organic solvents are no longer used, water and air pollution are reduced, the competitive strength of aluminum profile and plastic steel profile as environmental protection products is effectively improved, and some production costs are correspondingly reduced;