正确铺放彩钢瓦的方式

天物彩板专注彩板行业16年——河北彩卷价格清单报价表_彩钢瓦铺放方式请拨打网站上方电话咨询

彩钢瓦压型钢板作为传统的屋面和墙体材料，广泛应用于工业厂房、民用建筑、仓库和大跨度钢结构厂房的屋面和墙体。用户在安装过程中或多或少会遇到一些问题。易钢产品总结了彩钢瓦压型钢板的正确铺设方法：

搭接安装，适用于长度小于或等于15米的屋面。当长度大于15米时，采用错列敷设安装。

铺设后，用专用钉子固定安装。依安钢铁产品采取了以下预防措施：

一。使用专用钉子固定时，必须在彩钢瓦的瓦骨中间打孔，以有效防水。

2。专用钉左右前后间距控制在50厘米至100厘米之间，一平方米内可固定4根钉。

三。在使用初期，彩钢瓦需要从下端冲孔到屋顶，这样会更加美观，而且密封完整效果也非常好。

As the traditional material of roof and wall system, color steel tile profiled plate is widely used in the roof and wall of industrial workshop, civil building, warehouse and large-span steel structure workshop. Users will encounter some problems more or less during installation. Yian steel products summarizes the correct way to lay the color steel tile profiled plate:

Overlapping installation, this method is applicable to the roof with the length less than or equal to 15 meters. When the length is more than 15 meters, it needs to adopt staggered laying and installation.
After laying, special nails shall be used for fixing and installation. The following precautions have been made for Yian steel products:
1. When using special nails for fixation, it must be punched in the middle of the tile bone of the color steel tile, so as to effectively waterproof.
2. The space between the left and right front and back of the special nails is controlled from 50cm to 100cm, and four nails can be fixed within one square meter.
3. At the beginning of use, the color steel tile needs to be punched from the lower end to the roof, so that it will be more beautiful, and the sealing and integrity effect is also very good.