彩钢板厚度标准的选择
天物彩板专注彩板行业16年——更多彩钢板铁皮厚度规格_彩钢板厚度标准_天物彩板请拨打网站上方电话咨询
彩钢板常用于建筑工程中。今天，它已成为一个不可或缺的地位。但值得一提的是，彩钢板种类繁多，厚度也存在个别差异。很多人仍然不知道具体的规格和尺寸。他们没有办法选择彩钢板。以下是贵州彩钢板的基本概况。
一般来说，彩钢板分为两层，尺寸根据客户要求而定。多数情况下，下层采用0.476mm彩钢板，墙面采用950型企业板，内外采用0.376彩钢板。当然，也有特殊情况。部分活动房镀锌钢板厚度为0.35-0.4mm。
如果是室外简易彩钢板活动房，彩钢板墙板将采用0.4厘米厚的镀锌板，镀锌锌含量为60—80克，夹芯填充材料将可采用泡沫板。
国际标准清洗厂、手术室等彩钢板厚度标准数据墙活动室是用0.6厘米以上的厚度，镀锌锌含量在110克以上，目的是防锈，彩钢板填料不能用聚氯乙烯，即泡沫板，防火等级是国家标准。
外墙板采用G550高强度彩铝镀锌钢板，底板厚度不小于0.60mm。内层为高强度铝锌复合钢板，底板厚度不小于0.50mm。厚度误差为±0.02mm。墙体保温材料为超细玻璃棉。
彩钢板涂装重量：铝锌含量≥180g/m2（前后）
墙板：az185热浸镀铝锌钢板
油漆施工：外板前20um厚氟碳面漆，5um厚环氧底漆
有机涂层：聚偏氟乙烯氟碳聚酯涂层系统
内板正面15um厚聚酯面漆和5um厚环氧底漆
背面20um厚聚酯面漆，5um厚环氧底漆
彩钢板厚度（底板）：外板≥0.6
5um厚聚酯面漆，背面5um厚环氧底漆
聚苯乙烯彩钢板夹芯板是以两层彩钢板为表层制成。通过自动复合成型机，在钢板上施胶，同时在板的两侧预埋薄壁槽钢，压入板内。
机制板规格：l×1150×50m，l×1150×75mm，l×1150×100mm；贵阳彩钢板手工板规格：l×985×50彩钢板厚度：0.426mm，0.476mm，0.50mm，0.60mm；聚苯乙烯密度≥18kg/m3；导热系数：0.041w/m.k；燃烧性能：B1级（阻燃）；最高使用温度：100。
Color steel plate is often used in construction projects. It has become an indispensable position today. However, it is worth mentioning that there are many types of color steel plate and individual differences in thickness. Many people still don't know
the specific specifications and dimensions. They have no way to choose color steel plate. The following is the basic overview of Guizhou color steel plate.
Generally speaking, the color steel plate is divided into two layers, the size depends on the customer's requirements. In most cases, 0.476mm color steel plate is used for the lower layer, 950 type enterprise plate is used for the wall surface, and 0.376
color steel plate is used for the inside and outside. Of course, there are also special cases. The thickness of galvanized steel plate in some mobile rooms is 0.35-0.4mm.
If it is the outdoor simple color steel plate movable room, the color steel
plate wall board will use 0.4 centimeters thick galvanized sheet, the galvanized zinc content is 60--80 grams, the sandwich filler material will be able to use the foam board.
International standard cleaning plant, operation room and other color
steel plate thickness standard data wall activity room is to use 0.6 centimeters above thickness, galvanized zinc content of 110 grams above, the purpose is to prevent rust, color steel plate filler can not use PVC, that is, foam board, fire rating is
national standard.
G550 high-strength color aluminum zinc plating steel plate is used as the outer wall plate, and the thickness of the base plate is not less than 0.60mm. The inner layer is made of high-strength aluminum zinc coated steel plate,
and the thickness of the base plate is not less than 0.50mm. The thickness error is ± 0.02mm. The wall insulation material is superfine glass wool.
Weight of color steel plate coating: aluminum zinc content ≥ 180g / m2 (front and back)
Wall
panel: az185 hot-dip aluminum zinc steel plate
Paint application: 20um thick fluorocarbon top coat and 5um thick epoxy primer on the front of outer panel
Organic oating: PVDF fluorocarbon polyester coating system
15um thick polyester
finish and 5um thick epoxy primer on the front of inner panel
20um thick polyester finish on the back, 5um thick epoxy primer
Color steel plate thickness (base plate): outer plate ≥ 0.6
5um thick polyester finish and 5um thick epoxy
primer on the back
Polystyrene color steel plate sandwich board is made of two layers of color coated steel plate as the surface layer. Through the automatic composite molding machine, the adhesive glue is applied on the steel plate, and at the
same time, the thin-walled channel steel is embedded on both sides of the board, which is pressed and dropped into the board.
Specification of machine-made plate: l × 1150 × 50m m, l × 1150 × 75mm, l × 1150 × 100mm; specification of Guiyang color
steel plate manual plate: l × 985 × 50 color steel plate thickness: 0.426mm, 0.476mm, 0.50mm, 0.60mm; polystyrene density ≥ 18kg / m3; thermal conductivity: 0.041w/m.k; combustion performance: Class B1 (flame retardant); maximum service temperature: 100.
