彩钢板生产编制设备才做规程的要素是什么？

彩钢板操作规程览叫运行规程，它的编制是根据设备使用说明书和工艺要求制定的，是用来指导正确操作使用设备的法规。设备操作规程的内容一般包括有:

(1)彩钢板设备技术性能和允许的极限数。如最大负荷、压力、温度、电压、电流等。(2)设备交接班的规定。两班或三班连续运转的设备，岗位人员交接班时必须对设备运行状况进行交接，内容包括:设备运转的异常情况、原有缺陷变化、运行参数的变化、故障及处理情况等。
(3)机组全线联动时各段的操作步骤和单台设备的操作步骤。包括操作前的准备工作和操作顺序。
(4) 彩钢板紧急情况处理的规定。
(5)设备使用中的安全注意事项。主要是关于非本岗位操作人员，未经批准不得操作本机，任何人不得随意拆掉或放宽安全保护装置等的规定。

(6)设备运行中一些紧急故障的排除方法。

Operation procedure is called operation procedure. Its compilation is based on the equipment operation manual and process requirements. It is used to guide the correct operation of the equipment. The contents of equipment operation procedures generally include:
(1) Technical performance of equipment and allowable limit number. Such as maximum load, pressure, temperature, voltage, current, etc（ 2) Regulations of equipment shift. For the equipment running continuously in two or three shifts, the post personnel must hand over the operation status of the equipment when handing over the shift, including the abnormal condition of the equipment operation, the change of the original defects, the change of the operation parameters, the fault and the treatment, etc.
(3) The operation steps of each section and single equipment during the whole line linkage of the unit. Including preparation and operation sequence before operation.
(4) Regulations on emergency handling.
(5) Safety precautions in the use of equipment. It is mainly about the non post operators, who are not allowed to operate the machine without approval, and no one is allowed to dismantle or relax the safety protection device at will.
(6) The elimination method of some emergency faults in equipment operation.