彩钢压瓦机压板跑偏的调试方法

天物彩板专注彩板行业16年——沈阳v760型彩钢板多少钱啊请拨打网站上方电话咨询

如果板向右运行，垫左角（送料架）或右下平（第一轴偏离下平，上轴随下轴落下）。压砖机是在湿制釉面砖过程中，对真空螺杆挤出机挤出、切割的毛坯进行成型、压制的液压机。自动压砖机可以单独安装使用，但需要人工装卸。还可配备自动上下料机械手、挤出机、切砖机、给坯机、运砖机等组成瓷砖生产线，无需人工操作。
彩钢压砖机工作台和工作台的转动有六道工序。除了机械分度和定位外，还设置了一套定位机构，保证工作台模具在每次冲压过程中的准确定位。该装置上模滑动台为箱体结构，滑动台导轨与机体上导轨接触长度大。上模每冲压一次，工作顺序有两次压坯，即上模在二次压坯到位后，上模上升10毫米，将泥坯全部排尽，然后上模将瓦坯向下压到位返回高位，模具使用寿命长，冲压产品质量好。
然后从一排到下一排，彩钢瓦片压装设备前后四角的高度从大框架到轴的上端是一样的。找一条直线，检查下轴是否在一条直线上，调整下轴左右两侧水平。然后拧紧两侧的锁紧螺母，将彩钢瓦设备排与后排对齐。中间轮的前后应成直线。调整上下轴间隙后，可直线调整机器。

If the plate runs to the right, pad the left corner (feeding rack) or the right bottom flat (the first axis deviates from the bottom flat, and the upper axis falls with the bottom axis). The tile press is a hydraulic press used for shaping and pressing the rough tiles extruded and cut by the vacuum screw extruder during the wet production of glazed tiles. The automatic tile press can be installed and used separately, but it needs manual loading and unloading. It can also be equipped with automatic loading frame and unloading manipulator, extruder, tile cutter, billet feeder and tile carrier conveyor line to form tile production line, without manual operation.

There are six working procedures for turning the worktable and the worktable of color steel tile press. In addition to mechanical indexing and positioning, a set of positioning mechanism is also set to ensure the accurate positioning of the worktable mold in each stamping process. The sliding table of the upper die of the device is a box structure, and the sliding table guide rail has a large contact length with the upper guide rail of the machine body. Each stamping of the upper die, the work sequence has two stamping of the adobe, that is, the upper die After the secondary pressing tile blank is in place, the upper die will rise by 10 mm to fully exhaust the mud blank, and then the upper die will press the tile blank down to the place to return to the high position, so the die has a long service life and the pressed product quality is good.
Then from the row to the next row, the height of the four corners of the front and rear lines of the color steel tile press equipment from the big frame to the upper end of the shaft is the same. Find a straight line, check whether the lower axis is in a straight line, and adjust the left and right sides of the lower axis to be horizontal. Then fasten the lock nuts on both sides, and align the row of colored steel tile equipment with the row after. The front and back of the intermediate wheel shall be in a straight line. After the clearance between the upper and lower shafts is adjusted, the machine can be adjusted in a straight line.