彩涂板上的不干胶怎么清除
天物彩板专注彩涂卷行业17年——彩涂板上的不干胶清除方法_山东彩钢板批发价格表_天物彩板请拨打网站上方电话咨询
目前，彩涂板广泛应用于建筑行业。在施工过程中，有时会被自粘材料污染。有一些处理自粘的方法和技巧，可以更好地消除自粘的影响。
1、如果彩涂板的自粘胶接触面积不是很大，可以直接用拉丝胶擦去，但切记使用清洁剂，不要使用脏粘的，会污染表面材料。
2、彩色涂布板污染面积大，使用橡皮擦时间长，可能不干净。这时，你可以拿一条干净的毛巾。你不能用容易脱发的头发，用汽油或酒精擦拭。这样，就很容易把它擦掉。
3.事实上，还有一种方法不含汽油或酒精。然而，这种方法更麻烦。用温水或热水反复擦洗，涂色镀锌板自粘软化后用肥皂清洗。这种方法浪费时间，因此不推荐使用，但如果没有酒精和汽油等材料。这是使用这个的唯一方法。事实上，擦洗会更干净。
4.另一种方法是使用清洁剂，如沥青和焦油。有很多用这种清洁剂洗车的地方。
At present,color coated board is widely used in the construction industry. It is sometimes contaminated with self-adhesive in the construction process. There are some methods and tricks to deal with self-adhesive, which can better remove the impact of
self-adhesive.
1. If the contact area of the self-adhesive of the color coated board is not very large, you can wipe it off directly with the drawing rubber, but remember to use the cleaner rubber, not the one that is dirty and sticky, which will pollute the surface
material.
2. For the large area polluted by the color coating board, it will take a long time to use the eraser, and it may not be clean. At this time, you can take a clean towel. You can't use the one that is easy to shed hair, and wipe it with
gasoline or alcohol. In this way, it will be easy to wipe it off.
3. In fact, there is another method without gasoline or alcohol. However, this method is more troublesome. It is to scrub it repeatedly with warm water or hot water, and then wash
it with soap after the color coated galvanized sheet self-adhesive softens. This method wastes time, so it is not recommended, but if there are no materials such as alcohol and gasoline. That's the only way to use this. In fact, scrubbing will be cleaner.
4. Anoher is to use cleaning agents such as asphalt and tar. There are many car washes with this kind of cleaning agent.
