彩涂钢板及镀铝锌钢板的询价与订货

天物彩板专注彩板行业16年——四川彩涂钢板询价价格表_订货镀铝锌钢板生产厂家请拨打网站上方电话咨询

1用户在订货时，应尽可能详细地研究使用方法和加工方法，选择合适的规格，以便厂家对询价进行具体研究，避免了产品虽符合用户订货规范，却不能按原用途或加工方法使用的麻烦。
2如果产品是按照JIS（日本标准）或ASTM（美国标准）订购的，所有制造商都可以生产此类产品。由于批量生产，具有经济性高、交货期短、质量稳定、互操作性好等优点。
三。如果是特殊规格，制造商和用户应首先讨论技术条件。如果用户能提供具体的内容，对厂家的研究是非常有帮助的。
（1） 目前使用的材料（镀锌或彩涂钢）和样品。
（2） 应用程序或其设计（蓝色）图的示例。
（3） 加工条件、加工设备和加工方法。
（4） 过去发生过什么问题吗？如果是的话，细节。
4如有必要，制造商将前往用户加工厂观察材料的实际加工情况。如果制造商认为可以根据研究结果制造，则可以进一步讨论价格、交货时间、交货条件等商业条件。
5如果厂家认为不能生产或验收，可以提出反建议，用户可以研究是否可以使用。在此期间，双方可以多次讨论。如果双方未能就条款达成一致，则交易将因技术条件无法达成而达成。
6对于第一个订单的选择，为了谨慎起见，用户可以少量订购试用，也可以先获得厂家的试件，对其适用性进行评估，并将结果通知厂家，然后进行小批量试用。小批量试用成功后，用户可以进入大批量订购阶段。

1. When making an order, the user should study the usage and processing method in detail as much as possible to select the appropriate specification, so that the manufacturer can make a specific study on the inquiry, and avoid the trouble that the product can not be applied to the original use or processing method although the product meets the user's order specification.

2. If the products are ordered according to JIS (Japanese standard) or ASTM (American Standard) for general use, all manufacturers can produce such products. Because of mass production, it has the advantages of high economy, short delivery time, good and stable quality and good interoperability.
3. If it is a special specification, the manufacturer and the user should discuss the technical conditions first. If the user can provide the specific content, it is very helpful for the manufacturer to study.
(1) Materials currently used (galvanized or color coated steel) and a sample.
(2) A sample of the application or its design (blue) drawing.
(3) Processing conditions, processing equipment and processing methods.
(4) Have any problems occurred in the past? If so, the details.
4. If necessary, the manufacturer will go to the user's processing plant to observe the actual processing of the materials. If the manufacturer considers that it can be manufactured according to the research results, it can further discuss the commercial conditions such as price, delivery time, delivery conditions, etc.
5. If the manufacturer thinks that it can not be produced or accepted, it can put forward counter proposal, and users can study whether it can be used. During this period, the two parties may discuss several times. In case the two parties fail to reach an agreement on the terms, the transaction will be concluded because the technical conditions cannot be reached.
6. For theoccasion of the first order, for prudence, the user can order a small quantity for trial use, or obtain the manufacturer's test piece first, evaluate its applicability, and inform the manufacturer of the results, and then carry out the small quantity trial. After the small quantity trial is successful, the user can enter the large quantity order stage.