分析山西彩钢瓦厂家的原料如何除湿
我们要山西彩钢瓦厂家质量比较好，所以我们需要对其材质进行除湿处理，以下常识彩钢瓦厂家将具体讲解，请您仔细了解。
彩钢瓦料的干燥设备有热风干燥机和除湿干燥机两种。
山西彩钢瓦厂家热风干燥器的原理是用热风吹走彩钢瓦中的水分。温度范围为80-1oC，大部分干燥时间为40-60min，热风干燥器为开放式系统，只能除去物料表面的水分。
山西彩钢瓦厂家
除湿烘干机的原理是用分子筛代替热风中的水分，然后用干燥的风吹走彩钢瓦中的水分。使用该方法，可将质量预测中的水分降低到0.1%以下，干燥温度一般在80-100oc，干燥时间一般为2-3H，功能稳定的干燥器可以将干燥风的露点降低到-30℃以下；如果质量预测中的含水量大于0.08%，预干燥需要热风干燥器。
We want color steel tile quality is better, so we need to dehumidify its material, the following common sense color steel tile manufacturers will explain specifically, please understand it carefully.
There are two kinds of drying equipment for color steel tile material, which are hot air drying machine and dehumidification drying machine.
The principle of hot air dryer is to use hot air to blow away the moisture in the color steel tile. The
temperature range is 80-1ooc, and most of the drying time is 40-60min. The hot air dryer is an open system, which can only remove the moisture on the surface of the material.
The principle of dehumidification and drying machine is that the moisture
in hot air is replaced by molecular sieve, and then the moisture in color steel tile is blown away by dry wind. Using this method, the moisture in quality prediction can be reduced to less than 0.1%, the drying temperature is generally 80-100oc, and the
drying time is generally 2-3H. The dryer with stable function can reduce the dew point of dry wind to below - 30 ℃; If the moisture content in the quality prediction is greater than 0.08%, the hot air dryer is required for pre drying.
