铝板到底能不能用激光切割？

激光切割铝功能：
1.精切缝： 铝板激光切缝一般为0.1mm-0.2mm
2、切割面整：激光切割毛刺铝渣切割面。

3.热变形小：激光加工的激光切割缝薄，速度快，能量主要集中，因此 铝板传递到切割工艺材料的热量小，相关材料的变形也很小。
4、节约材料：激光加工采用计算机编程，激光设备可切割不同形状铝板的材料，提高铝板的材料利用率，节约大量材料成本
5.切割厚铝可以看到激光发生器的主电源。最厚的6000W可以切割到16mm，最厚的4500W可以切割到12mm。
铝板属于高反射材料， 对激光造成很大的伤害！一般情况下，我们不建议开发企业的客户 铝板采取光纤激光切割机来切割铝板，尽量少用！
激光切割激光发生器的功率取决于铝板，6000W的厚度可以切割成16mm，4500W的切割线是12mm，但只有很高的加工成本，因为它是一种高反射材料，利用激光切割一束聚焦高功率密度的激光束对工件进行照射，使材料快速熔化，汽化、烧蚀或点火，同时，高速气流同轴束吹送熔融材料，以达到切割工件的目的。

Lar cutting aluminum function:

1. Fine cutting seam: the cutting seam of aluminum plate by laser is generally 0.1mm-0.2mm
2, smooth cutting surface: laser cutting burr aluminum slag cutting surface.
3. Small thermal deformation: the laser cutting seam of laser processing is thin, fast, and the energy is mainly concentrated, so the heat transferred to the cutting technology material is small, and the deformation of related materials is also very small.
4. Material saving: the laser processing adopts computer programming, and the laser equipment can cut the materials of different shapes of aluminum plates, so as to improve the material utilization rate of aluminum plates and save a lot of material costs
5. The main power supply of the laser generator can be seen by cutting thick aluminum. The thickest 6000W can be cut to 16mm, and the thickest 4500W can be cut to 12mm.
Aluminum plate belongs to high reflection material, which causes great damage to laser! In general, we do not recommend the development of enterprise customers to take optical fiber laser cutting machine to cut aluminum plate, try to use less!
Laser cutting laser generator power depends on the aluminum plate, the thickness of 6000W can be cut into 16mm, 4500W cutting line is 12mm, but only high processing cost, because it is a highly reflective material, the use of laser cutting a focused high power density laser beam of the workpiece, the material is irradiated fast melting, vaporization, ablation or ignition, At the same time, high-speed airflow coaxial beam blowing molten material, in order to achieve cutting workpiece.