如何清洗彩钢板呢？

为了更好地利用彩钢板，延长彩钢板的使用寿命，需要对彩钢板进行清洗，以保证彩钢板的亮度，延长彩钢板的使用寿命，增加彩钢板的美观性。那么，我们该怎么办？我们来看看。

众所周知，由于彩钢板的特性，在使用过程中，其表面会产生氧化皮、铁锈等污垢。所以它也有很多清洗注意事项，主要有以下几点。
1. 彩钢板操作人员负责用钢板清洗机清洗彩钢板，并登记清洗记录。
2.如果机在 彩钢板清洗或风干过程中需要停止，请按清洗停止按钮。如果您需要在紧急情况下停止机器，只需按下紧急停止按钮。
3.每次清洗彩钢板前，询问清洗压力是否为6kg/cm2~6.5kg/cm2。
4、彩钢板清洗机使用的清洗溶剂为无铅专用环保清洗剂
5.如果清洗机常使用，每周应添加20升清洗液。每周更换溶剂罐过滤盒的滤纸。
6.清洗后的彩钢板应由技术人员用坐标机进行检查。检查内容（钢板是否有划痕、鼓包或凹痕，钢板上是否有残余焊膏，孔壁上是否有残余焊料粉，钢板张紧是否正确，钢板是否变形）可通过检查支付或放入钢板架。
7.清洗钢板时，操作人员无需采取溶剂保护措施，加溶剂时应戴橡胶手套或塑料手套、口罩。
由于彩钢结构的施工重量相对较轻，且具有较高的强度和良好的整体刚度。建筑物的自重只有砖混结构的五分之一左右。
比如 彩钢板结构的住宅结构一般采用冷弯薄壁钢构件，钢肋一般采用耐腐蚀的高强度冷轧镀锌板，这样可以更好地避免彩钢板在施工和私用过程中的腐蚀，从而影响轻钢构件的使用寿命。

In order to make better use of the color steel plate and prolong its service life, we need to clean the color steel plate to ensure its brightness, prolong its service life and increase its beauty. So, what should we do? Let's take a look.

As we all know, due to the characteristics of color steel plate, in the process of use, its surface will produce scale, rust and other dirt. So it also has a lot of cleaning precautions, mainly as follows.
1. The operator is responsible for cleaning the color steel plate with the steel plate cleaning machine and registering the cleaning record.
2. If the machine needs to stop during cleaning or air drying, press the cleaning stop button. If you need to stop the machine in an emergency, just press the emergency stop button.
3. Before cleaning the color steel plate each time, ask if the cleaning pressure is 6 kg / cm2 ~ 6.5 kg / cm2.
4. The cleaning solvent used in steel plate cleaning machine is lead-free special environmental cleaning agent.
5. If the cleaning machine is in normal use, 20 liters of cleaning fluid should be added every week. Change the filter paper of the filter box in the solvent tank every week.
6. The cleaned color steel plate shall be checked by technicians using coordinate machine. The inspection contents (whether there are scratches, bulges or dents, whether there is residual solder paste on the steel plate, whether there is residual solder powder on the hole wall, whether the steel plate tension is correct, and whether the steel plate is deformed) can be paid or put into the steel plate rack through the inspection.
7. The operator does not need to take solvent protection measures when cleaning the steel plate, and wear rubber gloves or plastic gloves and masks when adding solvent.
Because the construction weight of color steel structure is relatively light, and it also has high strength and good overall stiffness. The self weight of the building is only about one fifth of that of the brick concrete structure.
For example, the residential structure of color steel structure is generally composed of cold-formed thin-walled steel members, and the steel rib is generally made of corrosion-resistant high-strength cold-rolled galvanized sheet, which can better avoid the corrosion of color steel plate in the process of construction and private use, thus affecting the service life of light steel components.