山西厂家如何更好的使用涂镀钢彩钢板之加工
滚压成型是生产山西0.5彩钢板和墙板的常用方法。为了提高彩钢板的现场性能，特别是钢板的变形面积，应遵循以下使用指南
▪ 板山西0.5彩钢板的大弯曲半径设计满足设计要求；
▪ 对于高钢板，需要更多的变形孔型；
▪
山西0.5彩钢板加工前应检查压辊是否清洁，各转动辊之间应保持合理的间隙，以免划伤涂层。
其他加工方法（压边、压花、冲压、开槽、穿孔等）
▪ 弯曲中心半径应尽可能大，以提高弯曲件的性能；
▪ 在冲压过程中，
山西0.5彩钢板应注意合理的模具间隙，以减少涂层损坏的可能性；
▪ 为了保证彩钢板的耐久性，有必要采用较小的压纹锐度和深度
▪ 如果发现彩涂钢板表面有划痕或背漆附着，往往是运输不慎造成的；
▪ 如果想减少损伤，可以考虑在加工过程中使用保护膜；
▪ 产品应水平固定，以避免捆与其他物体（如结构部件）直接接触。
Roll forming is the most common way to produce roof and wall panels with color coated sheet. In order to improve the field performance of color steel sheet, especially the deformation area of steel plate, the following use guidelines should be followed
▪ The large bending radius of the plate is designed to meet the design requirements;
▪ For high steel plate, more deformation passes are needed;
▪ Check whether the pressure roller is clean before processing, and keep a reasonable gap between
the rotating rollers to avoid coating scratch.
Other processing methods (blank holder, embossing, stamping, slotting, perforation, etc.)
▪ The bending center radius should be as large as possible to improve the performance of the bending part;
▪ In the process of pressing, reasonable die clearance should be paid attention to to to reduce the possibility of coating damage;
▪ In order to ensure the durability of color steel plate, it is necessary to use smaller embossing sharpness and
depth
▪ If scratches or back paint are found to adhere to the surface of color coated steel plate, it is often caused by careless transportation;
▪ If you want to reduce damage, you can consider using protective film during processing;
▪ The products should be fixed horizontally to avoid direct contact between bales and other objects such as structural components.
