印花彩钢板铺设的后续工作
天物彩板专注彩涂卷行业17年——印花彩钢板铺设的后续工作_印花彩涂卷生产安装电话请拨打网站上方电话咨询
彩钢板一般用于建筑物，但铺设后不能直接使用。今天，让我们来看看在铺设后的后续工作。
1.在后续工作中，首先需要铺设保温棉。铺设前，应检查保温棉的厚度是否相对均匀，并检查保修和证书是否符合设计要求。此外，铺设绝缘棉时，还应确保铺设更紧密，绝缘棉之间应无空隙，需要更及时地固定。
2.下一步是铺设屋顶。各边缘需严格按照规范要求进行搭接，檐口处的安装位置也需结合印刷彩钢板和玻璃棉确定，然后从檐口处自上而下铺设，检查两端的平整度和板材的平整度。
3、屋脊、天沟等部位的软防水一般需要铺设防水卷材，能较好地解决彩板的积水、渗漏问题。固定点应固定在压型板的顶部，以保证固定部位受力合理，防水结构合理。
4.压型钢板安装控制时，压型金属板的安装也应平直，板面不得有施工残留物和污物。
Printed color steel plates are generally used in buildings, but they can not be used directly after the laying. Today, let's take a look at the follow-up work after the laying.
1. In the follow-up, it is first necessary to lay the thermal insulation cotton. Before laying, it is necessary to check whether the thickness of the thermal insulation cotton is relatively uniform, and check whether the warranty and certificate meet
the design requirements. Moreover, when laying insulation cotton, it is also necessary to ensure more tight laying, and there should be no gap between insulation cotton, and it needs to be fixed in a more timely manner.
2. The next step is the laying
of the roof. Each edge needs to be overlapped in strict accordance with the requirements of the specification, and the installation position at the cornice also needs to be determined by combining the printed color steel plate and glass wool, and then
it needs to be laid from the cornice position from top to bottom, And it is necessary to check the flatness of both ends and the flatness of the plate.
3. The soft waterproofing at the ridge, gutter and other positions generally needs to be paved
with waterproof coiled plates, so it can better solve the problem of ponding and leakage of color plates. And the fixing point should be fixed on the peak of the profiled plate, so as to ensure that the stress of the fixing part is reasonable and the
waterproof structure is reasonable.
4. During the installation control of profiled steel plate, the installation of profiled metal plate should also be flat and straight, and there should be no construction residues and dirt on the plate surface.
