质量好的彩涂板主要表现在哪

天物彩板专注彩板行业16年——全国一站式生产加工配送，详细请拨打网站上方电话咨询

彩涂板生产厂家将介绍高品质彩涂板的性能。当我们使用像彩涂板这样的产品时，我们都想购买质量和价格都合适的产品。但有时我们可能会被不法商家骗去购买一些劣质产品。如果是，什么产品质量好？

2。铅笔硬度、T弯、冲击功等指标与加工性能密切相关，应充分考虑。
3当零件形状复杂、变形程度大时，应采用多道次成形。如果一次形成，涂层和基材之间的附着力可能会因过度变形而受损。
4.加工时，应根据模具形状、变形特点、工艺条件等因素设置适当的间隙，并在设置间隙时考虑涂层厚度。
5.大多数涂层可用作固体润滑剂，以满足大多数成形工艺的润滑要求。一些涂层可以通过调整配方来改善其润滑性。如果涂层的润滑性不够，可通过涂油、打蜡和可剥离保护膜覆盖来提高润滑性。
但应注意的是，润湿剂容易吸附污垢，安装前应将污垢清除干净。施工结束后，应尽快清除可剥保护膜。以上高品质产品的性能特点，希望客户在购买时一定要注意以上特点。
彩涂板生产厂家将介绍彩涂板运输中的注意事项。现在越来越多的用户想购买彩涂板，在购买彩涂板后的运输中应该注意什么？告诉我们。
一。彩钢板采购后，采用专用吊带或软吊带装卸。产品根据交货状态进行运输。垂直包装的钢卷在运输和装卸过程中也应保持垂直。
2。运输车辆车厢清洁，车厢底板铺设橡胶垫或其他防护装置，车厢周围采取必要的防护措施，防止包装起皱或碰撞。
3.彩涂板取出时，不得拖拽，以免切割时产生的毛刺划伤下面的钢板。
4.彩涂产品应固定牢固，避免在运输过程中因相对移动或滚动而造成产品损坏或事故。
这些都是我们在购买彩涂板时需要注意的问题。

The manufacturer of color coated plate will introduce the performance of high-quality color coated plate. When we use products like color coated boards, we all want to buy products with the right quality and price. But sometimes we may be cheated by illegal businesses to buy some inferior products. If so, what products are of good quality?

1. Mechanical property is an important index to measure formability and an important parameter to determine and adjust the processing technology. Therefore, the processing should be considered first.
2. Pencil hardness, T-bend, impact energy and other indexes are closely related to processing performance, which should be fully considered.
。 When the shape of parts is complex and the degree of deformation is large, multi pass forming should be adopted. If formed at one time, the adhesion between the coating and the substrate may be damaged by excessive deformation.
4。 During machining, appropriate clearance shall be set according to the mold shape, deformation characteristics, process conditions and other factors, and the coating thickness shall be considered when setting the clearance.
5。 Most coatings can be used as solid lubricants to meet the lubrication requirements of most forming processes. Some coatings can improve their Lubricity by adjusting the formulation. If the lubricity of the coating is not enough, the lubricity can be improved by oiling, waxing and covering with peelable protective film.
However, it should be noted that the wetting agent is easy to absorb dirt, which should be removed before installation. After construction, the peelable protective film shall be removed as soon as possible. The performance characteristics of the above high-quality products, we hope that customers must pay attention to the above characteristics when purchasing.
The manufacturer of color coated plate will introduce the precautions in the transportation of color coated plate. Now more and more users want to buy color coated plate, what should be paid attention to in the transportation after buying color coated plate? Let us know.
1. After the purchase of color coated plate, special sling or soft sling shall be used for loading and unloading. The products are transported according to the delivery status. The steel coil of vertical packaging shall also be kept vertical during transportation and loading and unloading.
2. The carriage of the transport vehicle shall be clean, the bottom plate of the carriage shall be paved with rubber pads or other protective devices, and necessary protective measures shall be taken around the carriage to prevent the package from wrinkling or collision.
3。 When the color coated plate is taken out, it shall not be dragged to prevent the burr generated during cutting from scratching the steel plate below.
4。 Color coated products shall be fixed firmly to avoid product damage or accident caused by relative movement or rolling during transportation.

These are the problems we need to pay attention to when we buy color coated plates.