天物彩板专注彩板行业16年——更多山东彩钢板活动房安装_山东彩涂板工厂_天物彩板请拨打网站上方电话咨询
观察基底厚度和涂层厚度。彩钢板由基体和彩腹膜或彩涂层组成。首先,我们必须考虑到基质和腹膜的厚度。较好的彩钢板基材为0.02-0.05mm,涂层或涂层厚度一般小于0.15mm。因为根据彩钢板的使用时间,底板的厚度是非常重要的。然而,一些彩钢板生产厂家往往将手和脚放在彩钢板的基材和涂层或薄膜上。它们降低了基板的厚度,但增加了腹膜的厚度,从而降低了彩钢板的生产成本。彩钢板生产企业共享彩钢板质量,大大降低彩钢板的使用寿命。
建议您阅读本文:
在拆除活动板房时,要保证活动板房泡沫夹芯塑料板的完整性。只有保证材料的完整性,才能达到资源循环利用的效果。如果不能使用,完整的泡沫夹芯板也可以更方便的处理,也可以减少环境污染。
Observe the substrate thickness and coating thickness. The color steel plate is composed of a substrate and a color peritoneum or a color coating. First, we must consider the thickness of the matrix and peritoneum. The better base material of color steel
plate is 0.02-0.05mm, and the thickness of coating or coating is generally less than 0.15mm. Because according to the use time of color steel plate, the thickness of the bottom plate is very important. However, some color steel plate manufacturers
often put their hands and feet on the base material and coating or film of color steel plate. They reduce the thickness of the substrate, but increase the thickness of the peritoneum, thus reducing the production cost of the color steel plate. Color
steel plate manufacturers share the quality of color steel plate, greatly reducing the service life of color steel plate.
It is recommended that you read this article:
As a kind of solid and reliable temporary house, the movable house
has brought great convenience to people. Its biggest feature is that it can be disassembled and assembled. When demolishing the movable house, the principle of "first install, then dismantle, then install" shall be followed.
One. The supporting
members of the movable house shall be removed span by span and frame by frame to prevent the overall instability and collapse of the movable house. When removing long members, at least two people shall cooperate in operation, and the removed long
members shall be placed stably or directly transferred to the ground.
2. When the movable room with supporting (or roof) frame is removed, the connection between the panel and the steel frame shall be removed first to separate the panel and
the steel frame. When removing the mobile house without fixed support frame, reliable temporary fixing measures must be taken.
Three. It is forbidden for the operator to stand on the component and shake, pry or smash the steel frame with a sledgehammer
for removal. The removed working panel, component, steel wire rope and other materials shall be transported to the ground in time. Throwing at high altitude is strictly prohibited.
When removing the movable board room, the integrity of the foam
sandwich plastic board should be ensured. Only by ensuring the integrity of materials can we achieve the effect of resource recycling. If it can not be used, the complete foam sandwich panel can also be more convenient to handle and reduce environmental
pollution.