一年内镀锌彩钢板市场要闻回顾

天物彩板专注彩板行业16年——容城质量好的彩钢一平米价格_天物彩钢板隔断包施工单价请拨打网站上方电话咨询

一。马来西亚对从中国和越南进口的热镀锌钢征收反倾销税。3月8日，马来西亚宣布对从中国和越南进口的热镀锌板和辊征收2.66%-16.13%的反倾销税。据政府部门介绍，反倾销税有效期为5年，从2019年3月8日至2024年3月7日，旨在解决进口产品造成的不公平贸易问题。
2。首钢镀锌汽车外板的工艺质量得到了高端汽车企业的认可。2019年一季度，首钢汽车镀锌外板产量同比增长80%，产品质量和性能指标大幅提高。首钢镀锌汽车外板钢成功替代进口同类产品，并应用于高端合资车企，帮助首钢汽车外板向高端迈进。
三。工业工程承建的成钢钒钛高强度冷轧板项目第一批镀锌机组成功下线。承德钢钒钛高强度冷轧板项目位于河北省承德市双滦区。由承德钢铁集团子公司承德钢铁钒钛冷轧板有限公司实施，分两期建设。是承德市重点工程。项目总投资约53.87亿元。一期建设年产70万吨酸洗板生产线、年产40万吨热镀锌生产线、一套7.5m/h酸再生装置及配套公辅设施，总建筑面积4.2万平方米。
四。邯郸钢铁有限公司的镀锌板直接供应给世界上最大的客车制造商。6月6日，在郑州宇通客车有限公司（以下简称宇通客车）生产车间，天车缓缓卸下海钢邯郸钢铁有限公司生产的30吨镀锌线圈dx51d+z-yt。这是我公司为宇通客车量身定做的镀锌线圈。该产品将用于客车内板的试制。这是该公司镀锌板首次直接供应给该公司，标志着该公司镀锌板已成功进入全球最大客车制造商行列，公司高端客户朋友圈进一步扩大。
5个。澳大利亚对中国展开热镀锌角钢反倾销调查。2019年6月24日，澳大利亚反倾销委员会发布第2019/79号公告称，应澳大利亚制造商galintelptyltd的申请，对从中国进口的热浸镀锌角钢展开反倾销调查。
6。攀钢研究院开发了高强度热镀锌新产品。攀钢西昌基地提供的高强度热轧酸洗原料板已顺利通过热浸镀锌试验，成品性能达到h550lad+Z品牌用户协议要求，攀钢热镀锌增加高强度产品。

1. Malaysia imposes anti-dumping duties on hot-dip galvanized steel imported from China and Vietnam. On March 8, it was announced that Malaysia had imposed an anti-dumping duty of 2.66-16.13% on imports of hot-dip galvanized sheets and rolls from China and Vietnam. According to the government department, the anti-dumping duty is valid for 5 years from March 8, 2019 to March 7, 2024, aiming to solve the unfair trade problems caused by the imported products.

2. The process quality of Shougang galvanized automobile outer plate has been approved by high-end automobile enterprises. In the first quarter of 2019, the output of Shougang's Galvanized automobile outer panel increased by 80% year-on-year, and the quality and performance indexes of the products were greatly improved. Shougang's Galvanized automobile outer panel steel successfully replaced the imported similar products, and was applied to high-end joint venture vehicle enterprises, helping Shougang's automobile panel to move towards a higher end.
3. The first volume of the galvanizing unit of Chenggang vanadium titanium high strength cold rolling plate project contracted by the industrial engineering was successfully put off the production line. Chengde Steel Vanadium Titanium high strength cold rolling plate project is located in Shuangluan District, Chengde City, Hebei Province. It is implemented by Chengde Steel Group subsidiary - Chengde Steel Vanadium Titanium cold rolling plate Co., Ltd. and constructed in two phases. It is a key project in Chengde city. The total investment of the project is about 5.387 billion yuan. In the first phase, a production line with an annual output of 700000 tons of acid pickling plate, a production line with an annual output of 400000 tons of hot-base plate galvanizing, a set of 7.5m/h acid regeneration device and supporting public and auxiliary facilities will be built, with a total construction area of 42000 square meters.
4. The galvanized sheet of Handan Iron and Steel Co., Ltd. is directly supplied to the world's largest bus manufacturer. On June 6, in the production workshop of Zhengzhou Yutong Bus Co., Ltd. (hereinafter referred to as Yutong Bus), the crown block slowly unloaded 30 tons of galvanized coil dx51d + z-yt produced by Handan Iron and Steel Co., Ltd. of hesteel. This is the galvanized coil tailored by the company for Yutong Bus. The product will be used for trial production of the inner plate of the bus. This is the first time that the company's galvanized sheet is directly supplied to the company, which marks that the company's galvanized sheet has successfully entered the world's largest bus manufacturer, and the company's high-end customer friend circle has further expanded.
5. Australia launched anti-dumping investigation on hot-dip galvanized angle steel to China. On June 24, 2019, the Australian antidumping Commission issued announcement No. 2019 / 79 that, at the application of the Australian manufacturer galintelptyltd, an antidumping investigation was launched against the hot dip galvanisedsteel angle imported from China.
6. Panzhihua Iron and Steel Institute has developed new high-strength hot-dip galvanizing products. The high-strength hot-rolled pickling raw material plate provided by Xichang base of Panzhihua Iron and Steel Co., Ltd. has passed the hot-dip galvanizing test successfully, and the performance of the finished product has reached the user agreement requirements of h550lad + Z brand, adding another high-strength product for hot-dip galvanizing of Panzhihua Iron and Steel Co., Ltd.