彩钢瓦如何正确铺放和固定封盖？

1、 彩钢瓦的正确铺设方法如下：
1搭接式（适用于长度≤15m的屋面）
2交错式（适用于长度≥15m的屋面）

2、 彩钢瓦专用钉的正确使用方法：
1彩钢瓦专用钉必须打在瓦骨中间才能起到防水作用。
2 彩钢瓦固定间距为50cm~100cm（4块/m2）。
三。为了达到美观、密封、整洁的效果，必须将特制的钉子从瓦片下端向屋顶方向打入
3、 彩钢瓦安装密封条屋脊瓦檐盖：
1彩钢瓦封条分为两部分，按瓦形压在屋顶上，用专用钉固定。
2彩钢瓦的边砖交接处，封底处理后直接用水泥覆盖，并用小挡砖将底砖封闭。
三。彩钢瓦下端直接安装在檐上，檐盖用螺钉固定。
4在背面瓷砖的交接处，用剪刀修剪控制接口，然后用玻璃胶重叠密封。

1、 The correct laying method of color steel tile is as follows:

1. Overlapping type (suitable for roof with length ≤ 15m)
2. Staggered type (suitable for roof with length ≥ 15m)
2、 Correct use method of special nail for color steel tile:
1. The special nail for color steel tile must be hit in the middle of tile bone to have waterproof effect.
2. The fixation interval of color steel tile is 50cm ~ 100cm (4 pieces / m2).
3. The special nail must be driven from the lower end of the tile to the direction of the roof in order to have a beautiful, sealed and neat effect
3、 Color steel tile installation sealing strip ridge tile eaves cover:
1. Divide the color steel tile seal into two parts, press it on the roof according to the tile shape, and fix it with special nails.
2. At the junction of the side tiles of the colored steel tiles, the back tiles are directly covered with cement after sealing treatment, and the bottom of the back tiles are closed with a small tile stop.
3. The lower end of the color steel tile is directly installed at the eaves, and the eaves cover is fixed with screws.
4. At the junction of the back tile, the control interface is trimmed with scissors, and then overlapped and sealed with glass glue.