彩涂板材质的作业方法简单介绍
天物彩板专注彩板行业——山东烟台彩钢卷0.6多少钱一米_天物彩板请拨打网站上方电话咨询
下面对彩涂板生产厂家介绍的彩涂板材料的工作方式进行简要而详细的介绍
1在运输彩涂板时，使用塑料薄膜化合物将各层之间隔开，以防止由于相对阻力而造成的磨损。
2
彩涂板生产加工的工作温度应在7℃左右；生产加工辊系的间隙应根据彩涂板的厚度进行调整，并清除辊面和垫板上的污垢。检查彩涂板两侧油漆是否脱落。如果油漆脱落，应查明原因，采取有效措施后才能重新生产。
三。在整个运输过程中，应避免油漆层的污染和污染。
4在储存、运输和使用的全过程中，应清除酸、碱、盐、溶剂等腐蚀性化学物质，防止雨水和冷凝水，不得浸泡或沾泥。
The following is a brief and detailed introduction of the working mode of the color coated plate material introduced by the color coated plate manufacturer
1. When transporting colored tiles, plastic film compounds are used to separate the
layers from each other, so as to prevent abrasion caused by relative drag.
2. The working temperature of color tile production and processing should be about 7 ℃; the gap of production and processing roller system should be adjusted according
to the thickness of color coated plate, and the dirt on the roller surface and backing plate should be eliminated. It is necessary to check whether the paint on both sides of the color coated plate is peeling off. If the paint falls off, the reason should
be found out and the product can be produced again after taking effective measures.
3. During the whole process of lifting and transportation, the paint layer damage, surface environmental pollution and impact should be avoided.
4.
In the whole process of storage, transportation and application, acid, alkali, salt, solvent and other corrosive chemicals shall be eliminated; rain and condensation water shall be prevented, and immersion or mud shall not be allowed.
联系我们
收藏本站
在线留言
网站地图
