彩涂板制造商工艺方法

天物彩板专注彩板16年——彩板生产加工配送一站式服务，详细请拨打网站上方电话咨询

作为一家专业的彩涂板制造商，最常见的工艺是：开卷机-缝纫机-滚筒-扩张器-开卷机活套-碱洗提-油脂-清洗-干燥-钝化-干燥-第一道涂层-面漆-面漆干燥-风冷-卷取活套-卷取机-（下辊打包入库）。以下是详细信息。

开卷机：其任务是作为开卷机的底板，根据变频工作频率稳定输送。缝纫机：首先是采用街头缝纫，保证生产的顺利进行。拉伸器：这是一个有用的拉伸系统。拉伸力来源于生产线的速度差。其作用是保证钢板在不支撑炉底的情况下平稳运行，防止钢板划伤。张力大小直接影响缠绕质量。
开环：开环的作用是保证生产的带钢是连续的，因为活套的实心带钢保证了带钢有足够的生产时间。是为了清洁基板上的油和杂质，保证板表面的清洁，为以后的涂装工艺打下基础。
清洗：脱脂后，用清水清洗板上的残液，确保无残液，为以后的产品质量操作做好准备。彩涂板被广泛使用。具有无污染、耐候性好、耐腐蚀、高加工等特点。
As a professional coating plate manufacturer, the most common process is: uncoiler - sewing machine - roller - expander - uncoiler looper - alkali elution - grease - Cleaning - drying - passivation - drying - first coating - finishing coat - finishing coat drying - air cooling - coiling looper - coiler - (lower roll is packed and put into storage). Here are the details
Uncoiler: its task is to serve as the bottom plate of uncoiler, and stably transport according to the frequency of frequency conversion. Sewing machine: first of all, it adopts Street sewing to ensure the smooth production. Stretcher: This is a useful stretching system. The tensile force comes from the speed difference of the production line. Its function is to ensure the smooth operation of the steel plate without supporting the furnace bottom and prevent the steel plate from scratching. The tension directly affects the winding quality.
Ring opening: the role of ring opening is to ensure that the strip steel produced is continuous, because the solid strip steel of looper ensures that the strip steel has enough production time. It is to clean the oil and impurities on the base plate, ensure the cleanness of the plate surface, and lay the foundation for the later coating process.
Cleaning: after degreasing, clean the residual liquid on the plate with clear water to ensure there is no residual liquid, so as to prepare for future product quality operation. Color coated plates are widely used. It has the characteristics of no pollution, good weather resistance, corrosion resistance and high processing.