彩钢卷生产中收卷部分的流程
天物彩板专注彩板行业16年——滨州彩钢卷厂家排名_滨州彩卷普通板多少钱一吨请拨打网站上方电话咨询
今天我们要和大家分享的是彩钢卷在生产加工过程中放卷部分的工作内容。让我们看看。
彩钢卷喷涂生产工艺完成后，张力器显示张力后转移到入口段。全自动生产线正常运行时，给料柴油发电机组为空。在入口段停车送料时，送料柴油发电机组再次存放从辊涂加工段操作的彩钢板卷盘。
下一卷开始放卷时，入口段将加快速度，活套将被拉出。将进料柴油发电机组改造成两个滚筒，张紧器保持进料柴油发电机组的中等承载能力。为了显示放卷后的张力，通过保护层垫块、缓冲托辊、保护层垫块夹送机将钢卷输送到切割机上，去掉钢卷的三通，将钢卷转化成卷，送入卷取机放卷。
在卷取机和夹送机中间是电子光学边缘控制机械设备。该控制器可以测量卷取机的边缘，即向卷取机发送信号，使其导槽跟踪，以保证彩钢卷在同一边缘上能释放。
当卷取机解卷以保证规定直径时，卷取机将越来越慢，卷取机将被锯断，振动给料机小车将缓慢上升，拉动卷取机，卷取机主轴轴承将上升和收缩，振动给料机小车将对卷取机进行捆扎和称重。
下一个线圈的大脑顶部被送入卷取机，卷取机的速度会加快，直到喂入壳中的线圈放电为止。这样，入口段的运行速度将与整个自动生产线的运行速度相同。
What we want to share with you today is the work content of unwinding part of color steel coil during production and processing. Let's have a look.
After the spraying production process of color steel coil is carried out, the tension is transferred to the entrance section after being shown by the tensioner. The feeding diesel generator set is empty during all normal operation of the automatic production
line. When parking and feeding at the entrance section, the feeding diesel generator set stores the color steel coil plate operated from the roller coating processing section again.
As soon as the next roll starts to unwind, the entrance section
will be speeded up and the looper will be pulled out. The inlet feeding diesel generator set is transformed into two rollers, and the tensioner maintains the moderate bearing capacity in the feeding diesel generator set. In order to show the tension after
unwinding, the coil steel is transported to the cutting machine through the protective layer cushion block, buffer idler and protective layer cushion block pinch machine, and the tee joint of the coil steel is removed, and the coil steel is transformed
into a roll into the coiler for unwinding.
Color steel coil
In the middle of the coiler and the pinch machine is the electronic optical edge control mechanical equipment. The controller can measure the edge of the coiler, that is, send a signal
to the coiler to make its guide groove track, so as to ensure that the color steel coil can be released at the same edge.
When the coiler unwinds to ensure the specified diameter, the coiler will be slower and slower, the coiler will be sawed off,
the vibration feeder car will rise slowly, pull the coiler, the main shaft bearing of the coiler will rise and shrink, the vibration feeder car will carry out binding and weighing of the coiler.
The brain top of the next coil is fed into the coiler,
which speeds up until the coil in the feeding shell is discharged. In that way, the entrance section will operate at the same speed as the overall automatic production line.
