彩钢手工板和彩钢机制板生产和施工工艺的区别

天物彩板专注彩板行业16年——彩钢手工板生产厂家和彩钢机制板施工工艺_天物彩板请拨打网站上方电话咨询

彩钢夹芯板作为一种新型的建筑材料，由于其独特的特性，在短时间内可广泛应用于各个行业的建设，特别是在净化工程领域。它不仅具有优良的防火隔热效果，而且施工安装更加方便，节省了施工时间和成本。
随着彩钢板的发展，根据生产工艺的不同，可分为手工制版和机械制版。机械板是由夹芯板生产设备直接加工复合而成。虽然生产快捷方便，但由于机器通过机器直接复合，在强度、平整度、美观性等方面都不如手工板，而且内部没有钢带，包边位置也没有龙骨。
相比之下，手工板生产需要手工添加夹芯材料和胶水，而夹芯材料和胶水是通过人工折叠形成的，内置钢带和外龙骨，使得手工板在强度和外观上都优于机制板。由于生产工艺复杂，需要人工操作，大大增加了人工成本，使得人工板的价格高于机制板。
施工方面，根据需方的工程要求确定手拉板的规格。在生产前，手工板的数量和尺寸已经匹配得很好。安装时只需按要求进行组装安装。由于人工板在施工前已进行了配套，可大大降低工程造价。不过，值得注意的是，在生产前，手工板必须精确匹配。如果计算错了，会比较麻烦，因为手动板不能切割，除非是转角位置。
虽然机制板的强度和平整度不如手工板好，但当机制板的数量和规格不如手工板准确时，由于是由机器直接复合而成，里面没有钢带，外面没有龙骨，所以安装时可以任意切割，但这无疑造成工程建设中各种材料的浪费。

As a new building material, color steel sandwich panel can be widely used in the construction of various industries in a short time, especially in the field of purification engineering, which is mainly due to its unique characteristics. It not only has excellent fire insulation effect, but also is more convenient for construction and installation, saving construction time and cost.

With the development of color steel plate, it can be divided into manual plate and machine-made plate according to the different production process. The machine-made board is directly processed and compounded by the sandwich panel production equipment. Although the production is fast and convenient, the machine-made board is not as good as the manual board in terms of strength, flatness and beauty due to the direct composite of the machine through the machine, and there is no steel belt inside and no keel at the edge wrapping position.
In contrast, manual board production requires manual addition of sandwich materials and glue, which is formed by manual folding, with built-in steel strip and external keel, which makes the manual board superior to the machine-made board in strength and appearance. Due to the complex production process, manual operation is required, which greatly increases the labor cost and makes the price of manual board higher than that of machine-made board.
In terms of construction, the specification of the manual board is determined according to the engineering requirements of the demander. Before production, the number and size of the hand-made board have been matched well. During the installation, it only needs to be assembled and installed according to the requirements. Since the manual board has been matched before the construction, the project cost can be greatly reduced. However, it is worth noting that before production, the manual board must be accurately matched. If the calculation is wrong, it will be more troublesome, because the manual board can not be cut, unless it is the corner position.
Although the strength and flatness of the machine-made board are not as good as that of the hand-made board, when the quantity and specification of the machine-made board are not as accurate as that of the manual board, because it is directly compounded by the machine, there is no steel belt inside and no keel on the outside, so it can be cut arbitrarily when installing, but this undoubtedly causes waste of various materials in the engineering construction.